Sheetcam setting lead in
Sometimes, if your job is NOT larger than the work area size for your machine and you get this error, you can reposition your work piece so when you zero X and Y that you fall within the work area. If the settings in your file are larger than the work area, then you will get this error window.
#Sheetcam setting lead in software
When you load a job into UCCNC, it looks at the G-Code automatically and compares the XYZ dimensions of your file against the software profile to make sure that the job can fit on your machine. Think of the “software limits” as invisible limit switches. The main reason for this is to protect your machine from crashing into itself if you run a job that is larger than the machine’s capabilities. This software profile tells UCCNC what the available work area size is on your machine.
#Sheetcam setting lead in install
Every machine has its own specific software profile that you install with UCCNC. This error happens when your design is larger than the allowable work area on the CNC machine.
![sheetcam setting lead in sheetcam setting lead in](https://i.ytimg.com/vi/D-BuRLhfLvk/hqdefault.jpg)
What does “The current job workspace is out of the set software limits” error window mean?
![sheetcam setting lead in sheetcam setting lead in](https://forum.langmuirsystems.com/uploads/default/optimized/2X/f/f159829d9c24b131a7f633bc445a009b0f11c3ab_2_375x500.jpeg)
In the live display window in UCCNC it shows you your project file as well as the location of the tool in real time. Why is the Yellow dot not in the location I set on my work piece in UCCNC?